A service of TrailersUSA.com
Dealers, Login Here!

New Livestock Trailer For Sale - 2019 EBY Ruff Neck 8' X 32' Livestock Trailer

$39,995.00
$38,000.00
Sale!

« Back   1 of 33 Image(s)   Next »
Livestock Trailer - 2019 EBY Ruff Neck 8' X 32' available New in Halsey, OR

2019 EBY Ruff Neck 8' X 32' Livestock Trailer For Sale at Diamond K Sales in Halsey, Oregon New Livestock Trailer - 2019 EBY Ruff Neck 8' X 32' Livestock Trailer for sale in Halsey, OR

 2019 EBY 32' RUFFNECK STOCK TRAILER 

NEW 2019 EBY RUFF NECK 32'x8'x6'6" (2) 10,000lb. axles, 17.5" H.D. steel wheels, 16 ply tires, Electric Brakes, (1) perm gate w/sliding pass thru, (1) no threshold rolling gate w/16' of rolling gate rail, outside tie rail at bottom, (4) corral loops at rear corners, (2) sets of tail lights, (5) marker lights each side top rail, (3) interior lights.

STOCK # 2029418

STANDARD SPECIFICATIONS …

Available Dimensions:

Floor Length:  24’6”, 26’, 27’6”, 29’, 30’6”, 32’, 35’
Outside Width:  7’3”, 8’, 8’6”
Inside Height:  6’6”, 7’, 7’6”


Running Gear:

GVWR: 19,000 lbs – 8,000 lb axles.  25,000 lbs – (3) 8,000lb axles.  25,000lbs – 10,000 lb axles.
Axles:  (2) 8,000# rubber ride (greased packed bearings), 102” wide on 24’6” and 26’ length.  (2) 10,000# rubber ride ( greased packed bearings), 102” wide on 27’6” and longer lengths.
Wheels:  17.5 x 6.75 heavy duty steel wheel, 8-lug.
Tires:  (4) 9R17.5 steel belted radials, load range G on 8,000# axles.  (4) 235/75R17.5 steel belted radials, load range H on 10,000# axles.
Brakes:  12-1/4” x 3-3/8” electric on 8,000# axles.  12-1/4” x 4” electric on 10,000# axles.
Safety Equip.:  Two chains and electronic breakaway kit.
Landing Gear:  Single drop leg, two speed, roadside crank with crank bushing.
Bogie:  Extruded aluminum bogie rails.  See engineered drawing for location.

Nose Construction:

Nose Assembly:  9º tapered nose with .080 aluminum smooth sheet sides and front, with aerodynamic Eby cast aluminum corner caps with extruded front corner posts.
Posts:  4-1/2” extruded aluminum hat shaped posts.
Bottom Rails:  10-1/2” extruded aluminum.
Crossmembers:  5” fabricated aluminum on 19” centers
Floor:  1/8” aluminum smooth sheet.
Upper Coupler:  5/16” x 5” x 7” tubular steel.
Lower Coupler:  2-5/16” ball coupler (30,000# ball rating) with steel hitch post section and aluminum front gusset, adjustable height 28” – 36-1/2” from ground to top of ball.

Box Construction:

Sheet:  .075 5454 H34 aluminum smooth sheet, riveted to side posts with ¼” rivets on 4” centers.  Punched air openings per chosen pattern, vertically ribbed.
Posts:  Extruded aluminum, 1” x 4-1/2” hat shaped side posts with integral closure track, spaced on 18? centers.
Bottom Rails:  7” tall extruded aluminum.
Top Rails:  6” extruded aluminum.
Crossmembers:  3” extruded aluminum I-beams on 12” centers.
Floor:  .115 6061 T6 aluminum diamond plate with (4) 1” high ridges, longitudinally on 19” centers.
Side Door:  28-1/2” wide, curb side.
Rear Frame:  3” x 5” extruded aluminum with Eby cast aluminum corner caps.
Rear Door:  Full swing with (3) 4” extruded aluminum offset hinges for extended swing radius.  Hinges are mechanically fastened and welded to rear frame.  Exterior sliding door on roadside with polyurethane rollers at the top and UHMW wear pads at the threshold.

Roof Assembly:

Sheet: One-piece .040 aluminum, screwed  to top rail on 4” centers.
Bows: Flat, hat shaped 1-1/2” x 4” extruded aluminum on 24” centers.

Partitions:

Std. Partition: Extruded aluminum tube and punched sheet construction with (2) horizontal stiffener rails and outside release slam latch.  Extruded aluminum pipe hinge with nylon bushing mounted curbside. Partition located at front of wheel wells.
Nose Partition: Bottom hinged, punched sheet construction with (2) self-catching rotary latches.

Lights & Wiring:

Lights:   12-volt D.O.T. approved, LED. With chrome bezels on marker lights.
Wiring:  A.T.A. color coded, sealed wiring harness.
Rear Lights:  QuadraLight, turn-tail-stop-back up, LED.  One light each side.
Inside Lights:  Two LED, with external rear water resistant switch.

Miscellaneous:

Tire Carrier:  Aluminum, mounted on exterior drop sheet.
Wheel Pockets:  Combination of 1/8” formed aluminum smooth sheet and heavy duty extruded axle rail.
Fenders:  Extruded rolled aluminum.
Bumpers:  Full width 3” molded rubber.
Skid Plates:  (3) 3/16” formed aluminum.
Paint:  Steel parts painted silver.
Conspicuity Tape:  Meets all US and Canadian regulations.

Popular options 

  • 7' Inside height
  • Rolling gate
  • 1/2 sliding or hinged pass through doors in interior gates
  • Spare wheel and tire
  • Plexiglas closures
  • Aluminum closures
  • Belly vents
  • Nose Vents

Ruff Neck trailers also are available with convenient option packages

  • Combo Package
    • Converts existing 4' of trailer into tack room which includes a permanent straight wall, sealed camper door, windows in the nose, and an inside light with seperate switch.

Contact Diamond K Sales

First Name (required)
Last Name (required)
Email (required)
Phone

Enter Your Questions/Comments Below:
 
Diamond K Sales

Diamond K Sales 15 American Drive
Halsey, OR 97348

Phone: 541-953-7548
Email Seller!

More Trailers for Sale →
Contact Seller Calculate Payment

Unit Info

Stock #
2029418
Quantity
1
Location
Halsey, OR
Condition
New

Model Details

Type
Livestock
Year
2019
Manufacturer
M.H. Eby
Brand
EBY
Floorplan
Ruff-Neck-8'-X-32'

Construction

Hitch
Gooseneck
Construction
Aluminum
Floor Type
Aluminum
Rear Opening
Single Rear
Load Type
Straight

Dimensions/Weights

Length
32' 0"

Warranty

Details